Complete Weighing Systems and Solutions
VisionWeigh Automatic Number Plate Recognition


Weightron's VisionWeigh Automatic Number Plate Recognition (ANPR) system provides a powerful and flexible tool for a wide range of weighbridge based operations, especially at remote or unmanned installations. Recent advances in ANPR technologies are leading to the increased integration of this technology within weighbridge applications.

VisionWeigh introduces a high level of site control and security, allowing pre-registered vehicles to carry out weighing procedures in a highly efficient manner. The system, which can be used to operate traffic lights and control security barriers, is an important asset to any driver-operated system and is fully compatible with Weightron’s powerful WinWeigh software suite.

Number plate details can be programmed directly into the D800 weight terminal without the need for a separate PC and related information can include product descriptions and vehicle tare weights. The use of stored tare weights removes the need for double weighing, thereby speeding up collection or delivery procedures. .

The Weightron system includes an integrated illuminator, high resolution digital camera, digital analyser and on-board relays, all contained in one standard security housing. VisionWeigh’s integral camera and computer unit continually adjust the exposure, gain and integrated on-board IR lighting to maximise the contrast and readability of the registration plate. Unlike CCTV/PC systems, VisionWeigh can read dirty plates and compensates for variations in plate reflectivity, strong headlamps and adverse weather conditions.

Driver operated weighbridge
ANPR camera
Selfbox

All in one system: camera, analyser and illuminator
Numbers can be programmed directly into D800
Processing of up to 20 number plates/second
Automatic adjustment for dirty plates and poor weather conditions
RAM or Flash management of white/black list
Digital I/O and serial ports for local actions
Weatherproof IP66 housing
Ethernet interface for supervised architecture
Winweigh compatible
Web server functionality for set-up via browser

For automatic or remote weighing in a typical system, the weighbridges usually have entry and exit barriers. Vehicles approaching the entrance are picked up by the camera and the number plate is checked against the database. If the vehicle is registered it is allowed through the first barrier onto the bridge to be weighed. At this point the driver inserts his card or key at the control terminal positioned outside the window and this initiates the weighing. The database can be programmed to contain complete details of the vehicle, including tare weight, and this information can be used for printing weight tickets and invoices.

Simple ‘command prompts’ guide the driver through the weighing process and as soon as the weighing has been successfully carried out, the vehicle is allowed off the weighbridge. If the vehicle is blacklisted, it is not allowed beyond the first barrier and a variety of alarms can be initiated. Such systems can also maintain a current and historical record of vehicles on site, allowing a comprehensive vehicle movement log to be maintained at both single and multiple sites. The whole process is carried out in reverse when the vehicle leaves. Overhead security cameras can even be used to take images of the contents of the vehicles as they are entering or leaving the weighbridge. Integrated message boards linked to the system can further help avoid congestion on busy sites by giving instructions to drivers.

tel: 01246 260062 .......fax: 01246 260844
ATEX Indicator Driver Operated Load Cells Pallet Truck Scales Counting Scales